Mazda : BT-50 (Gen2) Suspension Options
Vehicle Information
Make : Mazda
Model : BT-50 (Gen2)
|
Type : 4x4 Pick Up/ D/Cab/ Style Side/ Well Back/ Tray
Sub Type : 10/2011-On
|
Front Suspension : Coil Spring
|
Rear Suspension : Leaf Spring
|
Vehicle Details :
LBA "Load Bearing Accessories"
GVM "Gross Vehicle Mass"
|
|
Available Kits
| Kit Name |
Kit Price |
| UK-FOR-008A "Aussie Ryder" |
$1,949.76 (ea kit) |
| UK-FOR-008A-T "Aussie Ryder w/ Tapered Coil" |
$1,965.76 (ea kit) |
| UK-FOR-008B + Pre-Assembled Struts |
$2,136.76 (ea kit) |
Kit Includes :
1xpr Coils
2x Struts
2x Shock Absorbers
2x Leaf Springs
1x Leaf Springs Bush Kit
2x Greaseable Shackles
2x Greaseable Pins
4x High Tensile U/Bolts
Hide Component Details
|
|
Front Suspension
Front Shock Absorber/Steering Damper Options
| Shock Absorbers |
Part Number |
Price |
| Aussie Ryder Twin Tube Gas 0-50mm |
AR74498 |
$203.50 (ea) |
| Steering Dampers |
Part Number |
Price |
| NON Steering Damper Vehicle |
none |
P.O.A. (ea) |
|
Front Coil Spring Options
| Name |
Construction |
Price |
|
|
|
|
|
|
|
| FFR-90 |
Raised Height 0-50kg LBA 40-50mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| FFR-90HD |
Raised HD 50-100kg LBA 40-50mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| FFS-90 |
Standard HD 0-50kg LBA 0-20mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| KFFR-08T |
Raised Tapered Coil 40 - 50mm 0 - 50kg LBA |
$236.00 (pr) |
|
|
|
|
|
|
|
Front Suspension Notes
SUSPENSION BUSHES & PARTS (INCLUDED IN UK-FOR-008B)
PX-PREASSY "Pre-Assembled Struts (Uses TOPHAT-3080)" 1x $187.00
OPTIONAL
TOPHAT-3080 "Strut Tops (includes new top bushes)" ........2x $93.50 each
Vehicle may need Wheel Alignment, Headlight and Brake Proportioning Valve adjustment with raised suspension.
All raised height measurements are listed as a guide only.
|
|
Rear Suspension
Rear Shock Absorber Options
| Shock Absorbers |
Part Number |
Price |
| Aussie Ryder Twin Tube Gas 0-50mm |
AR74493 |
$160.00 (ea) |
|
Rear Leaf Spring Options
| Name |
Construction |
Price |
|
|
|
|
|
|
|
| UL398-1R |
Standard HD Loads to GVM 0-20mm (3+3) |
$308.88 (ea) |
|
|
|
|
|
|
|
| UL398-2R |
Raised Height 260kg to GVM 40-50mm (4+3) |
$308.88 (ea) |
|
|
|
|
|
|
|
| UL398-2RHD |
Raised HD 480kg to GVM 40-50mm (5+3) |
$308.88 (ea) |
|
|
|
|
|
|
|
Leaf Spring Extras
Bushes
KIT168K
1x Bush Kit
$132.00
|
Shackles
GSK390
2x Greaseable
$44.00 each
|
Pins
GPK387-2
2x Greaseable
$19.80 each
|
U Bolts
UB456
4x High Tensile
$20.35 each
|
Rear Suspension Notes
OPTIONAL
HEAVY DUTY SWAY BAR
RC009RZ-20 "Roll Control Rear Sway Bar" ............1x $450.00
FIRESTONE AIRBAG KITS
RR 4639 "Ride-Rite - 4x2 Non Hi-Ride Suspension" .......1x $825.00
RR 4634 "Ride-Rite - 4x4 and 4x2 Hi-Ride Suspension" 1x $825.00
NOTE: Compressors and On Board Air Kits are also available
Recommend Suspension Service every 12 months or 20,000km.
|
|
Special Information
- Vehicle heights may vary due to load and accessorie requirments, as a general rule a Standard Height Heavy Duty spring will raise the vehicle approx. 30mm while a Raised Height Comfort or Heavy Duty spring will raise the vehicle approx. 50mm (On a new vehicle with standard height)
- WHEEL ALIGNMENT REQUIRED
- MANDATORY 1,000KM CHECK-UP AND RE-TIGHTEN (Required under warranty conditions)
- All prices quoted are in Australian dollars, inclusive of GST. Fowarding, freight and fitting not included.
- CAUTION: Due to transort regulation in Australia, any increase in vehicle height greater than 50mm will require an engineers certificate. Check compliance with state transport Authorities
|
|
Back to the Mazda List
|
|
The Ultimate Suspension
2 Noonan Road
Ingleburn NSW 2565
Ph: 02 9618 7674
Int: +612 9618 7674
Fax: 02 9603 7249
|
|
