Nissan : NAVARA D40 ST-X PU/550 V6 Suspension Options
Vehicle Information
Make : Nissan
Model : NAVARA D40 ST-X PU/550 V6
|
Type : 4x4 Dual Cab
Sub Type : 04/2010-On
|
Front Suspension : Coil Spring
|
Rear Suspension : Leaf Spring
|
Vehicle Details :
FRONTIER Inclusive
*Notes; RAISED SUSPENSION RIDE HEIGHTS Front 560mm Rear 590mm
The raised ride heights (Eye Brow Heights) are measured vertically from the centre of the wheel to the edge of the guard. These heights are provided as approximate measurements only and can vary depending on the age of the vehicle and accessories fitted. Variations from factory will mean that not all vehicles will be raised by a set amount. They will however end up near these heights. We recommend measuring the vehicle first for indication on achievable lift.
Spanish built Navara D40s (VIN number Starts with VSK) have less adjustment in the wheel alignment and often need castor correction bushes or Lift Align control arms. Please contact our staff for more information.
|
|
Available Kits
| Kit Name |
Kit Price |
| UK-NIS-005A "Aussie Ryder" |
$1,905.76 (ea kit) |
| UK-NIS-005B + Pre-Assembled Struts |
$2,092.76 (ea kit) |
Kit Includes :
1xpr Coils Springs
2x Struts
2x Shock Absorbers
2x Leaf Springs
1x Leaf Bush Kit
2x Greaseable Shackles
2x Greaseable Pins
4x High Tensile U/Bolts
Hide Component Details
|
|
Front Suspension
Front Shock Absorber/Steering Damper Options
| Shock Absorbers |
Part Number |
Price |
| Aussie Ryder Twin Tube Gas Struts 0-50mm |
AR74095-V |
$203.50 (ea) |
| Steering Dampers |
Part Number |
Price |
| NON Steering Damper Vehicle |
none |
P.O.A. (ea) |
|
Front Coil Spring Options
| Name |
Construction |
Price |
|
|
|
|
|
|
|
| DFR-165 |
Raised Height 0-50kg LBA 40-50mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| DFR-87 |
Standard HD 0-50kg LBA 0-20mm |
$220.00 (pr) |
|
|
|
|
|
|
|
Front Suspension Notes
NOTE: Coil seat is lower on vehicles with the V6 Diesel. It can be raised for more height with "DFR-165" coils if required.
OPTIONAL
(INCLUDED IN UK-NIS-005B)
NAV-PREASSY "Pre-Assembled Struts Uses RS001 Strut Tops" 1x $187.00
<<< or >>>
RS001 ...."Strut Tops includes new top bushes" .............................2x $93.50 each
(INCLUDED IN UK-NIS-005C)
TRC-540 .."Lift-Align Control Arms Castor/Camper Correction" ...1x $1056.00
SUSPENSION BUSHES AND PARTS
ARB144240BT "Bottom Strut Bush-Ultimate Suits AR74095 & AUS74095" ....2x $24.20 each
SPF3023K ......."Control Arm Lower- Inner Standard" .......................................1x $275.00
SPF3024K ......."Control Arm Lower-Inner Offset Castor Correction Kit" .........1x $319.00
SPF3024XK ....."Control Arm Lower -Inner Max Offset Castor Correction Kit" 1x $264.00
SPF3022K ......."Control Arm Upper- Inner Standard" ........................................1x $264.00
SPF3022XK ...."Control Arm Upper- Inner Offset Camber Correction" .............1x $275.00
SPF3025-33K ...."Sway Bar Mount Bushing Measure Sway Bar- 33mm" ...1x $49.50
<<< or >>>
SPF3025-34.3K "Sway Bar Mount Bushing Measure Sway Bar- 34.3mm" 1x $49.50
Vehicles require wheel alignment, headlight and brake proportioning valve adjustment with raised suspension.
All raised height measurements are listed as a guide only.
|
|
Rear Suspension
Rear Shock Absorber Options
| Shock Absorbers |
Part Number |
Price |
| Aussie Ryder Twin Tube Gas 0-50mm |
AR74596 |
$160.00 (ea) |
|
Rear Leaf Spring Options
| Name |
Construction |
Price |
|
|
|
|
|
|
|
| ULNV11R |
Raised Height 260kg to GVM 40-50mm |
$308.88 (ea) |
|
|
|
|
|
|
|
| ULNV11R-HD |
Raised HD 480kg to GVM 40-50mm |
$308.88 (ea) |
|
|
|
|
|
|
|
| ULNV11RC |
Standard HD Loads to GVM 0-20mm |
$308.88 (ea) |
|
|
|
|
|
|
|
Leaf Spring Extras
Bushes
KIT141K
1x Bush Kit
$127.60
|
Shackles
GSKNSN-020
2x Greaseable
$44.00 each
|
Pins
GPK387-2
2x Greaseable
$19.80 each
|
U Bolts
UB453-2
4x High Tensile
$20.35 each
|
Rear Suspension Notes
OPTIONAL
FIRESTONE AIRBAG KIT
RR 4656 "Ride Rite" 1x $825.00
NOTE: Compressors and On Board Air Kits are also available
*Recommend Suspension Service every 12 months or 20,000km.
|
|
Special Information
- Vehicle heights may vary due to load and accessorie requirments, as a general rule a Standard Height Heavy Duty spring will raise the vehicle approx. 30mm while a Raised Height Comfort or Heavy Duty spring will raise the vehicle approx. 50mm (On a new vehicle with standard height)
- WHEEL ALIGNMENT REQUIRED
- MANDATORY 1,000KM CHECK-UP AND RE-TIGHTEN (Required under warranty conditions)
- All prices quoted are in Australian dollars, inclusive of GST. Fowarding, freight and fitting not included.
- CAUTION: Due to transort regulation in Australia, any increase in vehicle height greater than 50mm will require an engineers certificate. Check compliance with state transport Authorities
|
|
Back to the Nissan List
|
|
The Ultimate Suspension
2 Noonan Road
Ingleburn NSW 2565
Ph: 02 9618 7674
Int: +612 9618 7674
Fax: 02 9603 7249
|
|
