Nissan : TERRANO II Suspension Options
Vehicle Information
Make : Nissan
Model : TERRANO II
|
Type : 4x4 Wagon 2 or 4 Door
Sub Type : 11/1995-06/2005
|
Front Suspension : Coil Spring
|
Rear Suspension : Coil Spring
|
Vehicle Details :
Same as;
PATHFINDER R50
TERRANO RX
>>><<<
LBA "Load Bearing Accessories"
GVM "Gross Vehicle Mass"
|
|
Available Kits
| Kit Name |
Kit Price |
| UK-NIS-007 |
$1,078.00 (ea kit) |
Kit Includes :
2xpr Coil Springs
2x Struts
2x Shock Absorbers
Hide Component Details
|
|
Front Suspension
Front Shock Absorber/Steering Damper Options
| Shock Absorbers |
Part Number |
Price |
| 11/95-01/99 DRIVETECH Front Right 0-40mm |
DTS1087 |
$198.00 (ea) |
| 11/95-01/99 DRIVETECH Front Left 0-40mm |
DTS1088 |
$198.00 (ea) |
| 02/99-10/01 DRIVETECH Front Left 0-40mm |
DTS1085 |
$198.00 (ea) |
| 02/99-10/01 DRIVETECH Front Right 0-40mm |
DTS1086 |
$198.00 (ea) |
| 11/01-06/05 DRIVETECH Front Left 0-40mm |
DTS1073 |
$198.00 (ea) |
| 11/01-06/05 DRIVETECH Front Right 0-40mm |
DTS1074 |
$198.00 (ea) |
| Steering Dampers |
Part Number |
Price |
| NON Steering Damper Vehicle |
none |
P.O.A. (ea) |
|
Front Coil Spring Options
| Name |
Construction |
Price |
|
|
|
|
|
|
|
| DFR-84 |
Raised 0-50kg LBA 30-40mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| DFR-84HD |
Raised HD 0-90kg LBA 30-40mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| DFS-84 |
Standard HD 0-50kg LBA 0-20mm |
$220.00 (pr) |
|
|
|
|
|
|
|
Front Suspension Notes
Vehicles require Wheel Alignment, Headlight and Brake Proportioning Valve adjustment with raised suspension.
All raised height measurements are listed as a guide only.
|
|
Rear Suspension
Rear Shock Absorber Options
| Shock Absorbers |
Part Number |
Price |
| 11/95-01/99 DRIVETECH 0-40mm |
DTS1083 |
$121.00 (ea) |
| 02/99-On DRIVETECH 0-40mm |
DTS1071 |
$121.00 (ea) |
|
Rear Coil Spring Options
| Name |
Construction |
Price |
|
|
|
|
|
|
|
| *DRR-83 SWB |
Raised Height Loads to GVM 40-50mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| *DRR-83HD SWB |
Raised HD 300kg to GVM 30-40mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| *DRS-83 SWB |
Standard HD Loads to GVM 0-20mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| DRR-83 LWB |
Standard HD Loads to GVM 0-20mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| DRR-83EHD LWB |
Raised HD 300kg to GVM 30-40mm |
$220.00 (pr) |
|
|
|
|
|
|
|
| DRR-83HD LWB |
Raised Height Loads to GVM 40-50mm |
$220.00 (pr) |
|
|
|
|
|
|
|
Rear Suspension Notes
NOTE: Rear Shock top mount measures 16mm ID & bottom mount measures 12mm ID
Max lift is 30mm due to driveline Vibration.
Recommend fitting adjustable pan-hard rod on raised vehicles.
*Recommend Suspension Service every 12 months or 20,000km.
|
|
Special Information
- Vehicle heights may vary due to load and accessorie requirments, as a general rule a Standard Height Heavy Duty spring will raise the vehicle approx. 30mm while a Raised Height Comfort or Heavy Duty spring will raise the vehicle approx. 50mm (On a new vehicle with standard height)
- WHEEL ALIGNMENT REQUIRED
- MANDATORY 1,000KM CHECK-UP AND RE-TIGHTEN (Required under warranty conditions)
- All prices quoted are in Australian dollars, inclusive of GST. Fowarding, freight and fitting not included.
- CAUTION: Due to transort regulation in Australia, any increase in vehicle height greater than 50mm will require an engineers certificate. Check compliance with state transport Authorities
|
|
Back to the Nissan List
|
|
The Ultimate Suspension
2 Noonan Road
Ingleburn NSW 2565
Ph: 02 9618 7674
Int: +612 9618 7674
Fax: 02 9603 7249
|
|
